Brief introduction : SLC type domestic waste incinerator equipment is mainly used for municipal solid waste incineration projects. This equipment is also suitable for leather, papermaking, printing, textiles, airports, tourism and other industries. The special waste and general industrial waste generated by these industries are harmlessly incinerated. The company's domestic waste has formed a series of products. The main specifications are daily incineration of domestic waste: 50 tons, 80 tons, 100 tons, 120 tons, 150 tons.
Brief introduction : The water-seal inner scraper type slag discharger equipment is non-standard equipment, which is specially designed and manufactured for the waste gas incinerator flue gas treatment. In domestic waste incineration, the high-temperature flue gas will contain more dust, which will generate more dust. It will increase the workload and cost for subsequent flue gas treatment. At the same time, during the cooling process of 250 ° C ~ 400 ° C, these dusts will become a carrier of harmful substances such as dioxin, and once again synthesize harmful substances such as dioxin and cause smoke Emissions are difficult to meet.
Brief introduction : The side double chain scraper ash out conveyor equipment is specially used for the ash out of the waste incinerator. The whole is closed and docked with the ash out of the furnace bottom to realize the ash out of the incinerator and the sealing function of the bottom of the incinerator. Pressure.
Brief description : The air preheater equipment is non-standard equipment, which is specially designed and manufactured for the hot air required by the incinerator. After the high-temperature flue gas enters the air preheater, it exchanges heat with the cold wind blown by the blower in the internal pipeline, heats the cold air blown by the blower, and cools the flue gas into the subsequent flue gas treatment system. Under the control of the monitoring and control system, hot air is blown into the drying area in the garbage incinerator to dry the garbage as needed, and blown into the pre-combustion area and the combustion area for combustion.
Brief description : The waste heat boiler equipment is an outsourced supporting product, which is specially equipped for the realization of waste heat utilization. Through this equipment, high-temperature flue gas can be exchanged with soft water in the boiler to generate steam. A small amount of steam is used to preheat the bag dust collector in the subsequent flue gas treatment process. A large amount of steam is used to heat the office and living area or heat it Water supplies society and realizes the reuse of resources.
Brief description : Dry-type purification reaction tower equipment is non-standard equipment, which is specially designed and manufactured for waste gas incinerator flue gas treatment. The temperature of the flue gas exhausted from the outlet of the air preheater is controlled above 400 ° C. After entering the equipment, it comes into full contact with the NaOH alkali liquid droplets sprayed after the high-speed rotation of the rotary atomizer at the top of the tower, and reacts to produce powdery sodium Salt, to achieve rapid cooling and removal of harmful gases HCL, HF, SOX and other harmful components in the flue gas. The rapid cooling of the flue gas in the range of 400 ℃ ~ 250 ℃ is achieved to prevent the resynthesis of harmful substances such as dioxin.
8 records in total, showing 1-6, page 1/2